日产精品一线二线三线京东,а天堂中文在线官网,久久亚洲精品无码aⅴ大香,无码人妻AV一二区二区三区

當前位置:首頁 > 產品信息 > 校準測量 > 詳細信息
產品信息
校準測量
商品名稱:934 DRAGO
商品編號:
市場價格:
本站價格:
詳細信息

250°C to 30°C
To calibrate temperature sensors to 250°C look no further than the portable stirred liquid baths. The Drago calibrates from 30 to 250°C and the Hyperion from 45°C below ambient to 140°C, refer to separate sheet. The useable calibration volume is 65mm diameter and the overall depth of 190mm gives more than twice the volume of alternative products. We allow 15mm for the magnetic stirrer and assume that the liquid in the bath is on average 15mm from the rim. We therefore quote 160mm as the working depth.
Stirred liquid baths are suitable for temperature sensors of all types, shapes and sizes. Accuracies are much greater than those from Dry Blocks alone and with suitable reference thermometers performance of up to 0.005°C is achievable.
The Drago is available in two models. If the liquid is directly in the block then the controller only model, or Basic (B) model, can be selected. This model is also suitable where an external indicator and standard will be used. Alternatively the site model (S) includes a built in temperature indicator for high accuracy or for best accuracy an external indicator can be used, an ideal combination is the TTI-6 and 935-14-16 Probe, for more information refer to databook 3. The S model can be provided with UKAS certification.
The Drago can also be used with the supplied Cal NotePad software to automatically calibrate thermostats.
When using a separate indicator and probe (SITE or Stand Alone Model) then different accessories can be added for Dry Block, Blackbody, Surface Sensor, Liquid Containers and even ITS-90 fixed point operation.

Includes as standard: Windows Software, Computer Interface and a Ramp to Set Point Feature. Increased resolution of ±0.01 available throughout the range via the PC interface and from 0.01 to +99.99 locally on the auto-ranging front display. The controller features multi-point block to display correction giving good absolute accuracy.
New in the S model is universal sensor input allowing Platinum Resistance Thermometers, Thermocouples (types K, N, R, S, L, B, PL2, T, J and E) along with Linear Process Inputs including 4-20mA current transmitters to be displayed on the in-built indicator. The indicator can be programmed with up to five calibration points to provide high accuracy digital probe matching. The indicator and controller are both addressable over the communications link.

Features
65mm Diameter Calibration Volume
Portable Liquid Bath for high accuracy calibration of awkward shaped sensors
Convertible for Dry Block Operation and more
Calibrate all Sensor types
Windows Software and PC Interface as standard

Options


Stirred Liquid Bath
Water Bath

936-06-02

Includes a container, magnetic stirrer and probe guide and thermometer support kit

Metal Block Insert

936-06-01a

Standard Insert 8 x 8mm + 2 x 4.5mm diameter holes 157mm deep

936-06-01b

Blank Insert

936-06-01c

Special Insert.

Blackbody Target

936-06-03

Use with Standard Probe (935-14-61DB)

Surface Sensor Kit

936-06-04

Includes an Insert and an angled PRT.

Fixed Point Cells

17401 Slim

Gallium Slim Cell

Standard Probe

935-14-61DB

Platinum Resistance Thermometer

UKAS Calibration

 

UKAS Calibration available to Order

Carrying Case

931-22-64

Sturdy case accommodates the unit

C20 Oil

580-06-09

1 Litre of C20 Oil (from ambient to +200°C)

Very High Temp. Oil

915/09

1 Litre of V.H.T. Oil (from +150°C to +250°C)

The company is always willing to give technical advice and assistance where appropriate. Equally because of the program of continual development and improvement, we reserve the right to amend or alter characteristics and design without prior notice. This publication is for information only.

Note: Instead of putting liquids directly in the block liquid containers can be used to facilitate rapid change of liquids.
When using a liquid container, Dry Block Insert, Blackbody Target or the Surface Sensor Kit a separate reference thermometer should be used to compensate for the varying offset between the controller and the accessory temperature.
Suitable choices include the SITE model with probe.

DragoPLUS Performance - Dry Block


For Evaluation Reports, Uncertainty Budgets and Calculations with regard to EA10-13 UKAS etc, please contact Isotech - also http://www.isotech.co.uk/refer.html

Model No.

DragoPLUS

Temperature Range

+30°C to +250°C in an ambient of 25°C or below

Absolute stability
over 30 minutes

Stirred Liquid Bath:±0.025°C
Dry Block Bath: ±0.03°C
Blackbody Source: ±0.3°C
Surface Sensor Calibrator: ±0.5°C
ITS-90 Fixed Point Apparatus: ±0.0005°C

Computer Interface

Included with Windows Software

Thermal Performance

As a liquid comparison bath
Uniformity down to ±0.005°C over the full range

Calibration volume

65mm diameter by 160mm deep

Display Resolution

0.01 Up to 99.99
0.1  100.0 to 250.0°C
PC can display 0.01 across whole
range with the software included

Indicator units

°C, °F, K

Power

100 to 120V (50 / 60 Hz) or
200 to 240V (50 / 60 Hz)
1000 Watts

Overall dimensions

Height: 302mm
Width: 176mm
Depth: 262mm

Weight

8kg

国产真实伦在线观看视频| 国产漂亮白嫩美女在线观看| 99re66在线观看精品免费| 国产精品亚洲成在人线| 女人腿张开让男人桶爽30分钟| 亚洲熟妇无码一区二区三区| 弄的老熟妇受不了了| 在线观看人成激情视频| 久久久一本线一区二区| 熟女人妇 成熟妇女系列视频| 欧美综合乱图图区乱图图区 | 亚洲日韩久久综合中文字幕| 日本卡一卡二不卡| 中文字幕丰满伦子无码| 国产精品一区二区AV不卡| 3d动漫精品啪啪一区二区免费| 性做无码视频在线观看| 人妻aⅴ无码一区二区三区| 亚洲熟妇少妇任你躁在线观看无码 | 在线观看老湿视频福利| 2021国产精品国产精华| 蜜桃臀无码内射一区二区三区| 国产刺激对白 国产情侣| 国产成人综合久久精品| 人与禽交AV在线播放| 亚洲av无码资源在线观看| 亚洲国产成人精品无码区在线秒播 | 人人妻人人爽人人澡欧美一区| 麻豆久久婷婷五月综合国产| 欧美老熟妇牲交| 污污污污污污www网站免费| 在线无码视频观看草草视频| 精精国产xxxx视频在线| 中文字幕+乱码+中文字幕无忧| 国产精品人成在线播放新网站 | 精品国产SM捆绑最大网免费站| 成视频年人黄网站免费视频| ā片在线观看免费观看| 国产精品久久久久久久久岛| 国产精品福利网红主播| 日韩人妻无码精品无码中文字幕|