|
This Standard gain horn antenna has medium gain, low VSWR, and a constant antenna factor; excellent for both immunity and emissions testing. |
|
|
Frequency Range: |
5.85 GHz - 8.20 GHz |
|
Antenna Factor: |
32.2 dB/m |
|
Gain: |
14.8 dBi |
|
Maximum Continuous Power: |
250 Watts |
|
Max Radiated Field: |
500 V/m |
|
Beamwidth E-plane: |
30° |
|
Beamwidth H-plane: |
29° |
|
Impedance: |
50Ω |
|
VSWR: |
1.2:1 (1.5:1 max) |
|
Connector: |
WR-137 to N-Type female adapter |
|
Mounting Base: |
¼ - 20 Thread, female |
|
|
|
|
Physical Dimensions: |
|
|
Length: |
8.6 in. (21.8 cm) |
|
Width: |
2.6 in. (6.6 cm) |
|
Height: |
3.5 in. (8.89 cm) |
|
Weight: |
1.1 lbs. (0.5 kg) |
Features
- Frequency Range of 5.95 GHz to 8.20 GHz
- Receive and Transmit
- Linearly Polarized
- FCC, MIL-STD, VDE and TEMPEST Testing
- 1 Meter calibration included, horizontal polarization
The Standard Gain Horn Antennas are designed specifically for utilization in emissions and immunity testing over the frequency range of 1 to 40 GHz. Each antenna is linearly polarized and has medium gain, low VSWR, and a constant antenna factor. The Standard Gain Horn performance is very precise and predictable through design parameters. Comparisons of measured versus computed antenna factors and gain have been shown to be +/- .5 dB. Therefore, the antenna is considered to be a standard reference, similar to that of a resonant dipole below 1 GHz. The coax-to-waveguide adapter is the only power-limiting component on the antenna and can be removed if high fields are desired. Each Standard Gain Horn comes with a tripod mount that adapts to any tripod with ¼-20 male threads. Horizontal and vertical polarization is obtained by rotating the antenna on the tripod.
Recommended Accessories
- ATU-510 (Antenna Tripod Unit, wooden)
- AEH-510 (Azimuth and Elevation Head, Plastic)
- SAC-211 (3 meter N/N Cable, RG-214U)
- PAM-0118 (Preamplifier)
- SAC-18G-3 (3 meter N/N Cable, Low-Loss)
More Information
