|
This Standard gain horn antenna has medium gain, low VSWR, and a constant antenna factor; excellent for both immunity and emissions testing. |
|
|
Frequency Range: |
12.4 GHz - 18.0 GHz |
|
Antenna Factor: |
38.9 dB/m |
|
Gain: |
14.9 dBi |
|
Maximum Continuous Power: |
200 Watts |
|
Max Radiated Field: |
450 V/m |
|
Beamwidth E-plane: |
30° |
|
Beamwidth H-plane: |
29° |
|
Impedance: |
50 Ω |
|
VSWR: |
1.3:1 (1.6:1 max) |
|
Connector: |
WR-62 to N-Type female adapter |
|
Mounting Base: |
1/4 - 20 Thread, female |
|
|
|
|
Physical Dimensions: | |
|
Length: |
4.0 in. (10.2 cm) |
|
Width: |
1.5 in. (3.81 cm) |
|
Height: |
1.9 in. (4.83 cm) |
|
Weight: |
0.2 lbs. (0.09 kg) |
Features
- Frequency Range of 12.4 GHz to 18.0 GHz
- Receive and Transmit
- Linearly Polarized
- FCC, MIL-STD, VDE and TEMPEST Testing
- 1 Meter calibration included, horizontal polarization
The Standard Gain Horn Antennas are designed specifically for utilization in emissions and immunity testing over the frequency range of 1 to 40 GHz. The SAS-586 standard gain horn antenna is linearly polarized and has medium gain, low VSWR, and a constant antenna factor. The Standard Gain Horn performance is very precise and predictable through design parameters. Comparisons of measured versus computed antenna factors and gain have been shown to be +/- .5 dB. Therefore, the antenna is considered to be a standard reference, similar to that of a resonant dipole below 1 GHz. The coax-to-waveguide adapter is the only power-limiting component on the antenna and can be removed if high fields are desired. Each Standard Gain Horn comes with a tripod mount that adapts to any tripod with ¼-20 male threads. Horizontal and vertical polarization is obtained by rotating the antenna on the tripod.
Recommended Accessories
- PAM-0118 (Preamplifier)
- SAC-18G-3 (3 meter N/N Cable, Low-Loss)
- ATU-510 (Antenna Tripod Unit, wooden)
- AEH-510 (Azimuth and Elevation Head, Plastic)
More Information
